Next NI2400 User Manual page 29

3
DATALOGGER
NI2400
Tips
Multiple Sensor in one single Modbus Device
Our System allows the user to connect one single Modbus device providing information
coming from different sensors.
What if a sensor has more than 2 channels?
The NI2400 allows to create another sensor with the same Modbus address (Fig.9,10,11), so
user can select 4 (or more, creating other sensors) registers to read data from.
Pre Measure Actions (if required) will be set only in first sensor (relative to the Modbus slave
device) and Post Measure Actions will be set only in last sensor (always relative to the Mod-
bus slave device)"
Figure 45
Figure 46
www.ruggedaq.com
3
Figure 47
Figure 44
Figure 48
056
DATALOGGER
NI2400
www.ruggedaq.com
057