Next NI2400 User Manual page 7

1
DATALOGGER
NI2400
S1 S2 S2 S4
Example 3 (6 wires sensors)
User connects 3 sensors, all of them are 6 wires:
First of all we configure the datalogger to read this sensors, as shown in Figure 8.
Figure 8
www.ruggedaq.com
1
SENSOR1 will be connected to channel 1, A and B terminals, channel 2, A and B terminals,
and channel 3, A and B terminals.
SENSOR2 will be connected to channel 4, A and B terminals, channel 5, A and B terminals,
and channel 6, A and B terminals.
SENSOR3 will be connected to channel 7, A and B terminals, channel 8, A and B terminals,
and channel 9, A and B terminals.
Wiring schemes are available from web server, or in APPENDIX of this manual.
Figure 7
012
DATALOGGER
NI2400
S1 S2 S3
www.ruggedaq.com
Figure 9
013