Next NI2400 User Manual page 25

3
DATALOGGER
NI2400
• Tick the field m 24 ;
Add ux
• E
,
nAblE ThE nEw chAnnEl crEATEd wiTh poSiTion
• The page for the configuration of
mulTiplExErS
Figure 32
NOTE: selecting Mux 24ch on channel 22-23-24 it couldn't be possible to use them to
connect a sensor
• after you saved the configuration, select from left menu the entry
/ ;
mulTiplExErS
• the page opens. Here you could select
mulTiplExErS
www.ruggedaq.com
22-23-24, ;
And click EdiT
opens;
Figure 33
chAnnElS configurATion
24 .
mux ch
048
3
DATALOGGER
NI2400
• thus, the page opens. Thanks to the tick
mulTiplExEr EnAbling
ing on edit, to configure the channels of the selected multiplexer-.
NOTE: it is possible to enable at most 16 multiplexers. We advise to enable only the
multiplexers that are used.
Figure 35
www.ruggedaq.com
Figure 34
it is possible, push-
EnAblE
049