Digital Inputs Configuration - Next NI2400 User Manual

3
DATALOGGER
NI2400

DIGITAL INPUTS CONFIGURATION

The NI2400 has two digital inputs (IN1 & IN1) on its back side.
Figure 55
The digital inputs could be configured to acquire a
. The trigger could be used with a seismic station and it is used to start one or
e M OM e Te r
more acquisitions extemporaneous.
NOTE: in case of a rain gauge or anemometer, no elaboration of reading is considered
(ex: average speed, maximum, instantaneous, daily storage, etc.)
www.ruggedaq.com
or an or an
-
TrIgge r rA IN gA Uge A N
066
3
DATALOGGER
NI2400
To set up a digital input it is necessary:
• to select the entry
chAnnEl configurATion
• the page
digiTAl inpuTS configurATion
both digital inputs independently;
Figure 56
www.ruggedaq.com
, then
;
digiTAl inpuTS
opens. In this page it is possible to set up 1 or
067