System Time Clear; Scanner Time Clear - JRC JMA-3300 Series Installation Manual

Chapter 4 ADJUST MENU SETTINGS
4.11 MAINTENANCE

4.11.2 SYSTEM TIME CLEAR

The system calculates and stores the total operating time of the display unit.
The operating time can be initialized.
 System Time Clear
1 Open
Yes :
No :

4.11.3 SCANNER TIME CLEAR

The following operating time is calculated and stored in the scanner.
 Scanner Running Time
 Scanner Transmit Time
 Motor Rotating Time
Initialize those operating time above when magnetron or scanner motor is replaced.
 "Scanner Time Clear" operations
1 Open
"Scanner Time Clear" menu appears.
4-72
Maintenance - System Time Clear .
Clears the operating time.
Does not clear.
Maintenance - Scanner Time Clear .