Correct Position On User Map (Shift ); Correct Position On User Map (Shift Clear) - JRC JMA-610 Series Instruction Manual

3.6.2

Correct Position on User Map (Shift ).

If the display position on the user map is different from an actual position, it can be changed to the
correct position in manual mode.
Correcting the display position on the user map (Shift).
Procedures 1
2 Select
3 Put the cursor on a mark or end of a line, and press [ENTER] key.
4 Put the cursor on the point to be corrected, and press [ENTER] key.
5 Press [ MENU] key.
3.6.3

Correct Position on User Map (Shift Clear).

Clearing the corrected user map to its original state (Shift Clear)
Procedures 1
2 Select
3 Press [ MENU] key.
Press [MENU] key.
Select 8.Next and press [ENTER] key.
Select 4.NAV Information
2.Shift and press [ENTER] key
Cursor mark will be changed.
Positions of all marks and lines currently displayed will be corrected.
Menu will be closed.
Press [MENU] key.
Select 8.Next and press [ENTER] key.
Select 4.NAV Information
3.Shift Clear
Menu will be closed.
and press [ENTER] key.
and press [ENTER] key.
and press [ENTER] key.
3-32