Display Gps Receive Status - JRC JMA-3300 Series Installation Manual

Chapter 4 ADJUST MENU SETTINGS
4.9 GPS
"SBAS Satellite Number" menu appears.
Press the cursor key or turn the [MULTI] control to set the satellite number.
The satellite number can be set between 120 and 138.
After setting, open "4. Send Data", and send the setting to the SBAS receiver.
4.9.4

DISPLAY GPS RECEIVE STATUS

Displays the reception status of the GPS receivers (GPS, DGPS and WAAS receivers)
currently connected.
This setting is available only for JRC GPS/DGPS/WAAS receiver directly connected to
the connector for which "GPS" is engraved at the rear of the cabinet.
This function cannot indicate with transmission state.
 "Display GPS Receive Status" operations
1 Open
"Display GPS Receive Status" menu appears.
4-56
GPS - Display GPS Receive Status .