JRC JMA-3300 Series Installation Manual page 37

3.4 INSTALLATION OF THE CABLE BETWEEN THE DISPLAY UNIT AND THE SCANNER
Cable Wiring
Pin number
1 Blue (thick), gray (thick)
2 Purple (thick), brown (thick)
3 White (thick), orange (thick)
4 Red (thick), green (thick)
5 Black (thick), light blue (thick)
6 Black
Drain line (coaxial)
7
(Drain line: shield, shield meshwork)
8
9 Yellow (thick), pink (thick)
10 Coaxial line core
11 Yellow
12 Green
13 White
Drain line (shield)
14
(Drain line: coaxial, shield meshwork)
15 Shield line core
16 Orange (medium)
Shield meshwork
Cover
(Drain line, coaxial, drain line shield)
* Outer diameter of the cable: 14 mm +/-0.5 mm
Reference:
Although a cable is not connected to PIN No.8, +12 V voltage is outputted to the display
unit side. Power for the external simulator is supplied by this +12 V power supply outlet. So,
avoid using this connection for other purposes to prevent short-circuits.
Chapter 3 INSTALLATION OF THE DISPLAY UNIT
Color Wire material
AWG16
AWG16
AWG16
AWG16
AWG16
AWG22
AWG24
-
AWG16
AWG24
AWG24, twist pair
AWG24
AWG24, twist pair
AWG24
AWG24
AWG22
Signal name
2A
2A
1A
1A
2A
GND
VDE
- +12V
1A
VD
COM+
BZ
COM+
TIE
TI
BP
3
3-7