JRC JMA-3300 Series Installation Manual page 81

 FTC Curve Select
Switches the FTC Curve.
1 Open Sea
"FTC Curve Select" menu appears.
Sea and rivers can be set.
 FTC Slope Correction
Sets the slope of the FTC curve.
1 Open Sea -
"FTC Slope Correction" menu appears.
Press the cursor key or turn the [MULTI] control to set the slope correction value.
The slope correction value can be set between 0.0 and 2.0.
 FTC Offset
Sets the subtraction amount of FTC curve.
1 Open Sea
"FTC Offset" menu appears.
Press the cursor key or turn the [MULTI] control to set the STC offset.
The STC offset can be set between 0 and FF.
- FTC Curve Select .
FTC Slope Correction .
- FTC Offset .
Chapter 4 ADJUST MENU SETTINGS
4.3 RADAR ECHO
4
4-15