Scanner; Slope Correction - JRC JMA-3300 Series Installation Manual

Chapter 4 ADJUST MENU SETTINGS

4.6 SCANNER

4.6 SCANNER
Sets the scanner in details.
 "Scanner" operations
1 Open
"Scanner" menu appears.
4.6.1

SLOPE CORRECTION

Adjust the property because a scanner of 25 kW has a different receiver dynamic range
from those of 10 kW or less.
 Setting Slope Correction
1 Open
"Slope Correction" menu appears.
Press the cursor key or turn the [MULTI] control to set the slope correction value.
The slope correction value can be set between 0.0 and 2.0.
4-20
Scanner from the Adjust Menu.
Scanner - Slope Correction .