Radar Echo; Noise Level Adjustment - JRC JMA-3300 Series Installation Manual

4.3 RADAR ECHO

Sets radar echo.
 "RADAR Echo" operations
1 Open RADAR Echo
"RADAR Echo" menu appears.
4.3.1

NOISE LEVEL ADJUSTMENT

Adjusts the noise level.
 Noise Level Adjustment
1 Open RADAR Echo
"Noise Level" menu appears.
Press the cursor key or turn the [MULTI] control to set the noise level.
The noise level can be set between 0 and 255.
Reference:
The noise level is adjusted at the factory.
When adjusting the noise level after installation, perform only fine-tuning within ±5.
Chapter 4 ADJUST MENU SETTINGS
from the Adjust Menu.
- Noise Level .
4.3 RADAR ECHO
4-9
4