Procedure For The Automatic Re-Closing Time Setting - Teleco TVLink RS868 Instructions Manual

6.2- Procedure for the automatic re-closing time setting (from 5s max 90s)
This procedure can be done within 30 seconds after the reset.
Sum 5s to the set time.
1- Press for 5 sec. the push
button P3 of the transmitter;
the buzzer will sound 1 beep,
press and
hold for 5 sec.
On
P3
240V
Beeep
2- Press the push button P3
of the transmitter, the buzzer
will sound one beep, the time
to be memorised starts.
press once
P3
release and re-press within 5 sec. the
push button P3 of the transmitter 8 times,
the buzzer will sound 1 beep at each
pressure and at the end it will sound 2
beeps
press 8 times
5 sec.
Beep
start time count
Beep
P3
1 2 3 4 5 6 7 8
3- After the desired time press again the
push button P3 of the transmitter in order to
exit and memorise the re-closing time.
The buzzer will sound one beep.
press
Stop and memorize
once
the time
P3
Beep
9
(default 5sec.)
(if after 5 sec. the push but-
ton P3 will not be pressed
the buzzer will sound 4
beeps and exit from the pro-
cedure).
wait 5 sec.
Beep Beep
1 2