After the reset, the control unit carries out only opening commands until the
door is fully opened.
After the complete opening, the functioning of the commands is standard.
4- Dip-switch function
Dip1:
ON
OFF The closing movement is in dead man mode, during the opening it is automatic
(even if the automatic reclosing is excluded)
1
2
ON
ON
1
2
Dip2:
ON
ON
1
2
ON
OFF
1
2
**The automatic reclosing is activated only if the door is fully open to the limit switch.
After passing the photocell the door closes (after 3 sec.).
The opening and closing movement is automatic.
Activation of automatic reclosing **
Deactivation of automatic reclosing
3