How To Insert A Transmitter Via Radio; Memorization Of Channels From The Transmitter - Teleco TVLink RS868 Instructions Manual

5.3- How to insert a transmitter via radio without accessing the receiver when the memory is
empty (first installation), in this mode the channels function of the transmitter will be in mode 2.
The transmitter to be inserted will become the master transmitter for inserting other transmitters.
Press the internal push-button P3 of the
transmitter, the receiver will be activated
for the memorization and the buzzer will
sound continuously for 5 s.
press once
P3
Warning: when the memory is empty do not give power to more than one receiver at the same time,
because the above mentioned procedure activates all receivers.
5.4- Memorization of channels from the transmitter (additional transmitters)
The type of memorization of the channels (single or in pairs) depends on how the channel, which is
used in point 2, has been memorized.
1- Press the button P3 of
the transmitter, the buzzer
will sound continuously.
memorized
transmitter
press once
P3
Beeeeeep
2- Press within 5 seconds a channel
which is already present in the memory
of the receiver, the buzzer will interrupt
the sound for 1 sec, and then carry on
for 5 seconds.
Beeeeeep
1 sec.
Transmit the channel which is to be
memorized within 5 s. Once the channel
is memorized the buzzer will sound
intermittently.
memorized
transmitter
Beeeeeep
7
Beep...Beep...Beep...Beep...
3- Transmit the channel to be
memorized. Once memorized
the buzzer will sound
intermittently, release the push
button.
new
transmitter
Beep...Beep...Beep...Beep...