Time Settings; Procedure For The Courtesy Light Time Setting - Teleco TVLink RS868 Instructions Manual

6.0- Time settings

6.1- Procedure for the courtesy light time setting (from 1min max 12h)
This procedure can be done within 30 seconds after the reset.
Sum 1min to the set time.
1- Press for 5 sec. the
push button P3 of the
transmitter; the buzzer will
sound 1 beep,
press and
On
hold for 5
sec.
P3
240V
Beeep
2- Press the push button P3
of the transmitter, the buzzer
will sound one beep and the
courtesy light turns on, the
time to be memorised starts.
press once
P3
release and re-press within 5 sec. the
push button P3 of the transmitter 5
times, the buzzer will sound 1 beep
at each pressure and at the end it will
sound 3 beeps
press 5 times
5 sec.
Beep
start time count
Beep
P3
wait 5 sec.
1 2 3 4 5
3- After the desired time press
again the push button P3 of the
transmitter in order to exit and
memorise the courtesy light time,
the light turns off.
press
Stop and memorize
once
the time
P3
8
(if after 5 sec. the push
button P3 will not be
pressed the buzzer will
sound 4 beeps and exit
from the procedure).
Beep Beep Beep
1 2 3