Component Replacement
Remove the paper drive assembly
To remove the paper drive assembly:
Remove the printer assembly screws (1 and 2).
1.
Lift out the paper drive assembly and rotate clockwise 180° to set aside.
2.
Important: When reinstalling the paper drive assembly, be sure to push the paper cover
fully to the position pins on the print head bracket (3) before tightening the screw.
Note: The paper drive assembly power cables remain connected to the power supply
board.
Disconnect the cable connectors on the power supply board.
3.
70-00844-02 B
4-16
1
3
2
Burdick 8300/8500