Cardiac Science Burdick 8300 Service Manual page 43

To remove the mainboard:
Disconnect the keyboard cable connector.
1.
Disconnect the power supply board cable from.
2.
Disconnect the video display cable and ground.
3.
Note: When reinstalling the video cable, ensure the connector is fully inserted and the
side clips are completely engaged. The figure below shows an incorrectly installed
cable:
Figure 4-2: Video cable installation
Remove the screws holding the board in place.
4.
Burdick 8300/8500
Disassembly
70-00844-02 B 4-19