Cisco Nexus 9516 Hardware Installation Manual page 81

Nx-os mode

Hide thumbs Also See for Nexus 9516:

Table of Contents

Replacing or Installing Modules, Fan Trays, and Power Supplies

Unscrew 4 captive screws (2 at the top of the module

and 2 at the bottom of the module).

Hold the 2 fan tray handles with both hands.

Step 3

Hold both handles on the front of the fan tray with both of your hands and pull the fan tray out of the slot.

Step 4

Set the fan tray on antistatic material or inside an antistatic bag.

Pull on the fan tray to slide it out of the chassis. Set the

fan tray on an antistatic surface.

Cisco Nexus 9516 NX-OS Mode Switch Hardware Installation Guide

Removing a Fan Tray

Table of Contents