Safety Notes - ABB SACE PR010/T Instructions Manual

1. Safety notes

WARNING
This symbol indicates information about procedures or situations that may
cause injury to personnel, damage to the unit or financial loss.
WARNING
Carefully read the entire contents of this handbook. Damage resulting from
failure to comply with the instructions effectively invalidates the terms of
guarantee. The manufacturer declines all liability for damage to the unit
caused by incorrect or improper usage.
ABB SACE also declines all liability for any ensuing damage or injury. Do
not use the unit in damp or wet environments.
If in doubt about the safety of the unit, take it out of service to prevent
inadvertent usage.
The unit's safety may be impaired if:
1. the unit shows visible signs of damage
2. the unit does not work
3. the unit is stored for a long period or has incurred damage during shipment.
Do not switch on the unit immediately after having transferred it from a hot environment to a cold
one. Water condensation could damage or destroy the unit. Wait until the unit adapts to the new
ambient temperature before switching it on.
Never leave discharged batteries inside the unit since the battery fluid may leak and damage the
unit.
Do not use abrasive detergents, petrol or alcohol etc. to clean the unit, since these products may
damage the unit's surface.
ABB SACE SACE PR010/T RH0025002 L2551
20
3/20