Inputs/Outputs - ABB SACE PR010/T Instructions Manual

The specifications of the external power supply supplied are as follows:
Vin
Vout
Max output current
The specifications of the rechargeable batteries supplied are as follows:
Size
Type
Voltage
Capacity
The operating autonomy of the batteries during testing depends on the type of release tested, the
type of tests performed, the different release versions and the operations performed by the user.
When testing, for example, a PR112/P unit the batteries operate for about 2 hours under test
conditions and 6 hours in stand-by mode.
The battery recharge time is about four hours with unit switched off.
The batteries recharge automatically when the SACE PR010/T test unit is connected to the
external power supply.
The rechargeable batteries are supplied discharged. The batteries must therefore be charged
before using the PR010/T test unit for the first time.
The test unit may also be connected to the external power supply.

6.3 Inputs/Outputs

The SACE PR010/T test unit uses a set of signals to perform its various testing, programming and
reading functions. The main characteristics of these signals are as follows:
Output voltage range:
Maximum output current:
Input voltage range:
Minimum input impedance:
ABB SACE
= 100...240 Vac (47...63 Hz)
= 12 Vdc ±5%
= 2.7A
AA
NiMH
1.2V
1300 mA/h
- 5 ... +12 Vdc
1A constant
0 ... +15 Vdc
1 Mohm
SACE PR010/T RH0025002 L2551
20
15/20