Unit Dimensions; Dt-300 Entire Unit Outside Dimensions; Compatibility; Figure 55 Dt-300 Download Tool Outside Dimensions - JCM GLOBAL DT-300 Series Operator Integration Manual

8 UNIT DIMENSIONS

DT-300 E U
NTIRE NIT
Figure 55 illustrates the DT-300™ entire Unit outside dimensions.

9 COMPATIBILITY

Table 18 lists the Validator Types compatible with the "BlueWaveDX" DT-300™ Device. Refer to the 
"DT-300 Software Storage Destination Folder"
Destination Folder for each DT-300™ Device being Programmed.
Compatible
Validator
DIP Switch Settings are not required.
UBA Series downloading is available when the DT-300 Status
is either "Download Mode" or not "Download Mode". If it is
UBA Series
necessary to set the DT-300 into "Download Mode", set DIP
Switches #6, #7 & #8 to ON, and keep DIP Switches #1
through #5 in their OFF position.
Set DIP Switches #6, #7 & #8 to ON, and keep DIP Switches
iVIZION Series
#1 through #5 OFF.
Set DIP Switches #1, #7 & #8 to ON, and keep DIP Switches
VEGA Series
#2 through #6 OFF.
Set DIP Switches #1, #6, #7 & #8 to ON, and keep DIP
TBV-100 Series
Switches #2 through #5 OFF.
DIP Switch Settings are not required.
iPRO Series downloading is available when the DT-300 Status
is either "Download Mode" or not "Download Mode". If it is
iPRO Series
necessary to set the DT-300 into "Download Mode", set DIP
Switches #6, #7 & #8 to ON, and keep DIP Switches #1
through #5 in their OFF position.
NOTE: The Destination Folder intended for download to the specific DT-300 Device must be EXACTLY as
shown in the Table 18 Column, including the "Space" existing before the word "System".
Twenty (20) Software Programs can be saved in the DT-300 Destination Folder. If saving over twenty (20)
Software Programs in the DT-300 Device, the functions may not work properly.
P/N 960-000167R_Rev. 1 {EDP #214645}
DT-300™ Series Download Tool Operator Integration Guide
O D
UTSIDE IMENSIONS

Figure 55 DT-300 Download Tool Outside Dimensions

Column to create the proper compatible Validator's 

Table 18 DT-300 Compatible Validators

Validator Download Setting
DT-300 Software
Storage Destination
Folder
UBA System
iVIZION System
VEGA System
TBV-100 System
iPRO System
© 2013, Japan CashMachine Co., Limited
1 4
All Dimension are
in Millimeters
USB Connection
Type A - Type B
Type A - Mini B
Type A - Mini B
Type A - Mini B
Type A - Mini B
