Backlight Control; Software Data File; Received Log File; Firmware File - JCM GLOBAL DT-300 Series Operator Integration Manual

B C
ACKLIGHT ONTROL
The DT-300™ Device contains the following Back-
light Control Functions:
The Backlight is always lit.
Bootloader: –
MainApplication: –
pressing any Function Key or by booting the
MainApplication (after a short delay). It is
extinguished automatically, following a delay.
NOTE: The Backlight is lit each time a Key is
pressed; however, there is no specific
Function Key that controls it.
S D F
OFTWARE ATA ILE
Table 13 lists the Software Data File information.

Table 13 Software Data File Information

Item
File Name
File Contents
*. An arbitrary name is present with a "COM" extension.
R L F
ECEIVED OG ILE
Table 14 lists the received Log File. The received
Log File is always created as a new File.

Table 14 Received Log Files

Item
UBA: mmm_ssssssssssss_nnnn.DAT
TBV/iVIZION/iPRO: 
mmm_ssssssssssss_nnnn.LOG
mmm: Model Name
File Name ssssssssssss: Serial Number (12-digit
decimal. If the number was not read, none.)
nnnn: Number (4-digit decimal)

e.g., "UBA_0001.DAT", "iPRO1234.LOG"

7 CONNECTOR PIN ASSIGNMENTS

Table 17 lists the DT-300™ USB "Type A" Connector Pin Assignments, respectively.
Pin No. Signal Name
VBUS
1
2 DM
3 DP
4 Ground
*. I/O (Input/Output) Terminals as viewed from outside the DT-300™ Device.
P/N 960-000167R_Rev. 1 {EDP #214645}
DT-300™ Series Download Tool Operator Integration Guide
The Backlight is lit by
Description
*
xxxxxxxxx.COM
Download Software Data
Description

Table 17 DT-300 USB Type "A" Pin Assignments

DT-300 USB Type "A" Connector
UBA-4R-D14T-4D (JST)
*
I/O
OUT +5V
IN/OUT USB Data-
IN/OUT USB Data+
- Power Ground
Table 14 Received Log Files (Continued)
Item
Binary Format File written Log Information.
File Contents Save the Data received from the Device
without processing.
Time Stamp Fixed
*. Creating file name with valid small Serial Numbers.
†. An error will occur once a "9999" Serial Number is exceeded.
F F
IRMWARE ILE
Table 15 lists the MainApplication Firmware File
presently written in the DT-300™ Device Memory.

Table 15 Existing Firmware File

Item
File Name BWDXFyyxx.hex
File Contents Motorola S Type Format Program File
*. "yyxx" indicates the Version Number (e.g., Version 1.23=0123).
EEPROM D
ATA
Table 16 lists the saved File written into the
EEPROM of the DT-300™ Device.

Table 16 EEPROM Data File Information

Item
File Name BWDXINFO.INF
File Contents Text Format File written data for the EEPROM
* †
Function
© 2013, Japan CashMachine Co., Limited
1 3
Description
Description
*
F
ILE
Description