Component Names; Primary Features - JCM GLOBAL DT-300 Series Operator Integration Manual

2 COMPONENT NAMES

Figure 2 illustrates the DT-300™ Functional Component Part Names and Locations.
B
D
F
G
A. USB Connector Type A (Host)
B. LCD (Monochrome)
C. OK Button
D. CLR Button
E. Power LED (Red)
F. Direction Key Button

3 PRIMARY FEATURES

The DT-300™ "BlueWave" Series Download Tool contains the following primary features:
• The DT-300™ is a battery-driven device. The DT-300 transfers the software data to the power-
supplied Validator.
• The DT-300™ features an LCD Display. The Bootloader update and the MainApplication function
selection are available by using the LCD Display. The Acceptance Log, Error Messages, Version/CRC/
Serial Number, Maintenance Condition, Enabled Denomination and Language Selection are also
confirmed by the LCD Display.
• Refer to "Operation Procedures (MainApplication)" on page 6 of this Guide for more details.
P/N 960-000167R_Rev. 1 {EDP #214645}
DT-300™ Series Download Tool Operator Integration Guide
A
E
Figure 2 DT-300 Component Names
C
I
L
G. Power Switch
H. SD Card Slot
I. Battery Compartment Cover
J. Power Plug (Option)
K. Magnet
L. Magnet
© 2013, Japan CashMachine Co., Limited
2
K
H
J