Table of Contents
Advertisement
4. Press the
Key
OK
Request Indication Screen. Press the
to return to the previous Function Selection
Screen.
Figure 38 Maintenance Request Screen
5. Confirm the Maintenance Request (See Figure 38
& Figure 39). Press the
Key
to return to the previous Standby Screen.
Figure 39 Maintenance Non-Request Screen
Acceptance Log Function (Limited)
The possible storage amount for Banknote Log
Data is limited for each Validator Type. Table 8 lists
each Validator Type's Log Storage limitation.
Table 8 Log Storage Limit
Model Series
UBA Series
iVIZION Series
VEGA Series
TBV-100 Series
iPRO Series
To view/display the Banknote Log Data limit of the
Validator being tested, proceed as follows:
1. Turn the DT-300™ Power Switch ON, and the
SD Card check will begin (See Figure 40).
Figure 40 SD Card Confirmation Screen 7
2. Select "
ACCEPTANCE LOG
Selection Screen and press the
select it (See Figure 41).
Figure 41 Function Selection Screen 7
3. Connect a proper USB Cable between the Valida-
tor and the DT-300™ Device. When the connec-
tion is detected, the reload operation will begin
automatically (See Figure 42).
P/N 960-000167R_Rev. 1 {EDP #214645}
DT-300™ Series Download Tool Operator Integration Guide
to display the Maintenance
Key
CLR
Key
or the
OK
CLR
Storage Limit
50 Notes
1000 Notes
N/A
N/A
50 Notes
" from the Function
Key
to
OK
Figure 42 Standby Screen 5
The LCD Screen will display a Progress Bar
4.
during the Acceptance Log reading process as
shown in Figure 43.
NOTE: While reading the Acceptance
Log, NO Keyboard operations will be
accepted!
Figure 43 Acceptance Log Reading Screen
5. Once reading of the Acceptance Log is complete,
the LCD will display the Log Read Complete
Screen shown in Figure 44.
Figure 44 Log Read Complete Screen
Display the Number of the Banknote
Acceptance Log
To confirm the amount in the Banknote Acceptance
Log, use the
Key
UP
display the record desired. Press the
to return to the previous Function Selection Screen.
The Banknote Acceptance Log value will be read
again when re-connecting a USB Cable between
the Validator and the DT-300™ Device.
Table 9 lists the various Acceptance Log Displays
available.
Table 9 Acceptance Logs Available
Screen
© 2013, Japan CashMachine Co., Limited
1 0
or the
Key
to
DOWN
Key
CLR
Description
Record Start Date
Model Name
Version
Total Number of the
Banknote Insertions
Hide quick links:
Advertisement
Table of Contents
