Display The Acceptance Log; Enabling A Denomination Function; Table 6 Acceptance Log; Table 7 Reading Denomination Table - JCM GLOBAL DT-300 Series Operator Integration Manual

Figure 21 Acceptance Log Reading Screen
5. Once reading of the Acceptance Log is complete,
the LCD will display a "
Screen, as shown in Figure 22.
Figure 22 Log Read Complete Screen

Display the Acceptance Log

To confirm the Acceptance Log, use the
Key or the
DOWN
Press the Key
CLR
Function Selection Screen. The Acceptance Log
will be read again when re-connecting the USB
Cable between the Validator and the DT-300™.
NOTE: The maximum number of Folders allowed
in a DT-300 Device is 20. If more than twenty (20)
Folders are saved in the SD Card Folder, their
functions may not work properly.
Table 6 listed the available Acceptance Log Dis-
plays.

Table 6 Acceptance Log

Screen
P/N 960-000167R_Rev. 1 {EDP #214645}
DT-300™ Series Download Tool Operator Integration Guide
Log Read Complete
UP
Key to display the Log.
to return to the previous
Description
Model Name
Version
Banknote 
Acceptance Rate
Ticket 
Acceptance Rate
Denomination, 
Country Code, Year
and Acceptance Rate

Enabling a Denomination Function

To view/display the Denomination Table, proceed
as follows:
1. Turn the DT-300™ Power Switch ON and an SD
Card check will begin (See Figure 23).
"
Figure 23 SD Card Confirmation Screen 3
2. Select "
ENABLE DENOMI.
Selection Screen, and then press the
to select it (See Figure 24).
Figure 24 Function Selection Screen 3
3. Ensure that the LCD Display shows the Standby
Screen shown in Figure 25.
Figure 25 Standby Screen 1
4. Press the
OK
tion Table Screen (See Figure 26). Press the
Key to return to the previous Function Selec-
tion Screen.
5. Confirm that the current denomination selected
from the Denomination Table is correct.
Figure 26 Denomination Table Screen

Table 7 Reading Denomination Table

C
Country Code (3-digit)
D Banknote (5-digit)
E Denomination ($ or €)
Y Issued Year (2-digit)
NOTE: If the information cannot be
displayed within 3-digits, the rest of the
information can be shown by scrolling
the Display using the UP/DOWN Key.
© 2013, Japan CashMachine Co., Limited
8
" on the Function
OK
Key to display the Denomina-
Code Example
EUR, USA etc.
100, 200, 500 etc.
$ or €
02
Key
CLR