Replacement Parts And Accessories; Service Information - Adam Equipment AQT Series Manual

Note: Calibration may be required before weighing. Read section 8.0 on
"CALIBRATION" first and if necessary calibrate your balance for accurate
weighing.

10.0 REPLACEMENT PARTS AND ACCESSORIES

If you need to order any spare parts and accessories, contact your supplier or Adam
Equipment. A partial list of such items is as follows-
•
Power Supply Adapter
•
In use cover

11.0 SERVICE INFORMATION

This manual covers the details of operation. If you have a problem with the scale
that is not directly addressed by this manual then contact your supplier for
assistance. In order to provide further assistance, the supplier will need the
following information which should be kept ready:
A. Details of your company
-Name of your company:
-Contact person's name:
-Contact telephone, e-mail,
fax or any other methods:
B. Details of the unit purchased
(This part of information should always be available for any future
correspondence. We suggest you to fill in this form as soon as the unit is
received and keep a print-out in your record for ready reference.)
Model name of the scale:
Serial number of the unit:
Software revision number
(Displayed when power is first turned on):
Date of Purchase:
Name of the supplier and place:
C. Brief description of the problem
Include any recent history of the unit. For example:
-Has it been working since it's delivered
-Has it been in contact with water
-Damaged from a fire
-Electrical Storms in the area
© Adam Equipment Company 2005
-Dropped on the floor, etc.
•
Stainless Steel Pan