2.2
Faults and troubleshooting
The equipment runs through regular quality controls during production. Nevertheless, errors or
malfunctions on the equipment may occur. Individual parts are often the cause of faults and replacement
is usually sufficient. Please use the following overview to see the five most common errors and how to
repair them. If the equipment still does not work properly, please contact your contract partner.
Problem
Drive discs wobble or
make noises
Display does not work
Footplates are creaking
Creaking noises
No pulse reading
2.3
Maintenance and service calendar
The following routine work must be done in the specified time intervals:
Part
Display console
Lubricate the moving parts
Plastic cover
Screws and cable connections
Legends: C = cleaning; I = inspect
Cause
Drive pulley is loose
No plug connection, power
supply not plugged in
Footplates are loose
Screws are loose
• Sources of interference in
the room
• Using a chest strap:
- Unsuitable chest strap
- Chest strap is incorrectly
positioned
- Batteries are empty oder
discharged
Weekly
C
C
Solution
Tighten nuts
Check all plug connections and see if the
power supply is plugged in
Tighten up the footplate screws
Check screws are properly tightened
• Eliminate sources of interference (e.
g. mobile phone, loudspeaker, WLAN,
mover- and cleaning robot etc.)
• Use a suitable chest strap (see
recommended accessories)
• Reposition the chest strap and/or
moisten the electrodes
• Change or charge the batteries
Monthly
Twice a year
I
I
I
I
Annually
9
Need help?
Do you have a question about the FS10.5 Pro and is the answer not in the manual?