SSV Works RG4-DM3 Manual

SSVWORKS, 201 N. Rice Ave Unit A, Oxnard, CA 93030
www.SSVworks.com
I
Phone: 818-991-1778
I
Fax: 866-293-6751
WARRANTY INFORMATION:
All SSV Works enclosures are covered by a limited lifetime warranty against defects in
material or workmanship. All SSVWorks Electronics are covered by a limited 1 year warranty
against defects in material or workmanship. All SSV Works Speakers are covered by a
limited
1
yearwarranty against defects in material or workmanship. Labor for replacement of
defective components is not covered. Contact SSV Works for further warranty infonnation.
RG4-DM3
Polaris Ranger
MRB3 Dash Kit
A
Please read and understand these
instructions completely before
. installation to avoid possible injury, or
damage to the accessory or vehicle.
-9/16" Bit - Phillips Screwdriver -Scribe
PARTS LIST IMAGES
1. MRB3 Dash Kit 2. MRB3 Dash Screws x6
A. Use a panel tool to extract push pins on the top of the center
cup holders.
INSTALLATION NOTES
Please refer to the MRB3 User Guide for
instructions for wiring and operation.
B. With push pins extracted, lift to remove the cup holder.