Elma Elmasonic S Series Service Manual page 54

How to replace the heating
Tank removed
S450H, S900H
Tank unremoved
S450H, S900H
54
C
A
B
Illustration 13.3. Transducer tank removed, with vertically mounted
heating elements. Broke lines: cut the silicone fixation to remove.
Push the heating element out of the supporting rails as indicated by
the arrow.
Illustration 13.4. Transducer tank, unremoved, with vertically mounted
heating elements. Push the new heating elements into the supporting
rails as indicated by the arrow.
A
Cut the silicone fixation (A) with a knife.
B Push the heating element in the direction (B) out of the
supporting rails.
Prepare the new heating element: The new heating element
can be pushed in more easily if the edges of the aluminum
profile have been rounded off.
B Insert the new heating element (position C) into the supporting
rails. Push it into the supporting rails, be careful not to jam the
heating element. Then secure against displacement with
silicone.
SM_Elmasonic_S_02.2018_EN © Elma Schmidbauer GmbH