Table of Contents
Advertisement
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Elma Elmasteam 3
Summary of Contents for Elma Elmasteam 3
- Page 1 Operating Instructions High-performance steam jet cleaner Elmasteam GB english...
-
Page 2: Table Of Contents
Content General................3 Important safety warnings ..........3 Product description............4 Delivered equipment and accessories ......4 3.1.1 Elmasteam 3 / Elmasteam 5 ........ 4 3.1.2 Elmasteam 10 ............4 3.1.3 Optional additional equipment ......5 CE conformity ............. 5 Product features............ -
Page 3: General
Wrong operation may cause a risk of scalding by hot steam! Unauthorized third persons must not stay within reach of the steam jet. Be careful when operating the unit in order to prevent injuries caused by hot steam. © Elma GmbH & Co KG BA/Elmasteam/GB/0306... -
Page 4: Product Description
“M“ for monthly maintenance • maintenance tube “J “ for yearly maintenance 3.1.2 Elmasteam 10 as Elmasteam 3 and 5, but with 2 outlets and 3 variants: • 2x flexible hand piece • 2x fixed nozzle with foot-activated switch or •... -
Page 5: Optional Additional Equipment
The present Elmasteam steam jet cleaner is in compliance with the CE marking criteria and the following EC directives: 73/23/EEC Low voltage directive 89/336/EEC EMC directive 97/23/EEC pressure units The declaration of conformity is available from the manufacturer. © Elma GmbH & Co KG BA/Elmasteam/GB/0306... -
Page 6: Product Features
(to be connected to external compressor) • modern safety devices, in compliance with the valid norms (see section 3.2) Operating modes Elmasteam 3 and 5: • steam / compressed air (if compressed air connection is available) Operating modes Elmasteam 10: •... -
Page 7: Diagram: Module Variants
B: pump (Aquamatic) flexible hand piece connection for external Elmasteam 10 compressed air inlet Operating modes: Elmasteam 3 and 5: steam / compressed air Elmasteam 10 steam / compressed air / hot water © Elma GmbH & Co KG BA/Elmasteam/GB/0306... -
Page 8: Technical Details
(kg) Variant A: fixed nozzle with foot-activated switch Variant B: flexible hand piece Variant C: outlet option 1x hot water + 1x steam Variant A+A ; A+B ; B+B Variant C+A ; C+B BA/Elmasteam/GB/0306 © Elma GmbH & Co KG... -
Page 9: Safety Devices
Illustration 3.1: Unit top view screw cap of filling opening for manual filling filling bead/collecting basin for overflow water handles ventilation slits Elements front view Elmasteam 3 Elmasteam 5 Illustration 3.2: Operating elements Elmasteam 3 / 5 © Elma GmbH & Co KG BA/Elmasteam/GB/0306... - Page 10 Illustration 3.3: Operating elements Elmasteam 10 Visual indicator lamp „min water“ The minimum level of liquid in the tank has been reached. Fill the tank. Steam volume control for second outlet (ES10 only) Description see D. BA/Elmasteam/GB/0306 © Elma GmbH & Co KG...
-
Page 11: Elements Back View
Product description 3.10 Elements back view Elmasteam 3 Elmasteam 5 Illustration 3.4a Elmasteam 3 + 5 back view Elmasteam 10 Illustration 3.4b Elmasteam 10 back view © Elma GmbH & Co KG BA/Elmasteam/GB/0306... -
Page 12: Functioning Of The Fixed Nozzle
There are 2 switch positions (illustration 3.5). 50% pressed down activates compressed air 100% pressed down activates hot steam (on Elmasteam 10 also hot water at outlet on the left possible) 100% 100% Illustration 3.5: Foot-activated switch BA/Elmasteam/GB/0306 © Elma GmbH & Co KG... -
Page 13: Flexible Hand Piece
The outlet of the safety pressure valve is behind the ventilation openings on the back of the unit. When the valve is activated, steam will be discharged through the ventilation openings for a short period. © Elma GmbH & Co KG BA/Elmasteam/GB/0306... -
Page 14: Mounting Of Fixed Nozzle With Foot-Activated Switch (Option)
5. Connect the plug of the foot-activated switch to the socket on Mounting foot- activated switch the Elmasteam (illustration 3.4 D). Illustration 4.2: Connection with Illustration 4.3: Mounted fixed blind screw nozzle BA/Elmasteam/GB/0306 © Elma GmbH & Co KG... -
Page 15: Mounting Flexible Hand Piece (Option)
6. Mount the supporting angle for the tube (illustration 4.6). 7. Mount the supporting angle for the hand piece (illustration 4.7). Illustration 4.4 Connection with Illustration 4.5 Mounted fixed blind screw nozzle Illustration 4.6 angle support tube Illustration 4.7 angle support © Elma GmbH & Co KG BA/Elmasteam/GB/0306... -
Page 16: Filling Of The Unit - Filling By Hand
How to connect the Connect the pump as described in section 4.6. Observe the safety warnings to prevent damages on the pump. pump BA/Elmasteam/GB/0306 © Elma GmbH & Co KG... -
Page 17: Connection Pump "Aquamatic
For initial filling of the tank we recommend to open the screw cap at the filling duct to let the air escape from inside the unit. As soon as the LED “maximum” on the pump turns on the screw cap can be closed again. © Elma GmbH & Co KG BA/Elmasteam/GB/0306... -
Page 18: Handling During Operation
As soon as the operating pressure (8 bar) is reached, the green “ready” lamp “ready” indicates that the unit is ready for operation. As soon as a nozzle is activated the indicator lamp goes out. BA/Elmasteam/GB/0306 © Elma GmbH & Co KG... -
Page 19: Working With The Hand Piece
(right) key on the hand piece. If the key is released, the outlet of compressed air at the nozzle is interrupted. (This function is available only with correct compressed air connection on the back of the unit. See section. 6.2). © Elma GmbH & Co KG BA/Elmasteam/GB/0306... -
Page 20: Working With The Fixed Nozzle
Maintenance / care / repair Maintenance works requiring the opening of the unit are not Do not open the unit necessary. Read and observe the following instructions before carrying out any maintenance works. BA/Elmasteam/GB/0306 © Elma GmbH & Co KG... -
Page 21: Monthly Maintenance Works
6. As soon as the tank is completely empty, close the ball valve and remove the maintenance tube. © Elma GmbH & Co KG BA/Elmasteam/GB/0306... -
Page 22: Yearly Maintenance Works
4. Direct the free end of the tube into a bucket filled half with water. 5. Put the unit back in upright position. 6. Fill the unit over minimum level. Filling quantities: Elmasteam 3: 1 litre; Elmasteam 5 / 10: 2 litre BA/Elmasteam/GB/0306 © Elma GmbH & Co KG... -
Page 23: Repair
Use original spare parts only. The CE marking can lose ist validity in case of unauthorized opening of the unit. The manufacturer cannot be held responsible for any damage caused by unauthorized opening of the unit. © Elma GmbH & Co KG BA/Elmasteam/GB/0306... -
Page 24: Putting Out Of Action And Waste Disposal
Putting out of action and waste disposal Putting out of action and waste disposal The unit can be taken to metal and electronics recycling stations or returned to the manufacturer.
Need help?
Do you have a question about the Elmasteam 3 and is the answer not in the manual?
Questions and answers