How to replace the front panel
11
How to proceed
50
How to replace the front panel
The front panel consists of adhesive foil. There is no further
adhesive necessary.
The unit does not require to be opened.
To replace the front panel proceed as follows:
1. Pull off the turning knobs as described in section 7.
2. Carefully pull off the front panel (see illustration 11.1.).
3. Put on the new adhesive front panel.
4. Mount the turning knobs.
Illustration 11.1. Pull off the front panel. (Illustration with open unit)
SM_Elmasonic_S_02.2018_EN
© Elma Schmidbauer GmbH