Ricoh M 2700 Setup Manual page 12

Hide thumbs Also See for M 2700:
Table of Contents

Advertisement

Easy Setup Using a PIN Code
● Make sure the Ethernet cable is not connected to the
machine.
● In Steps 19 to 21, configure each setting within two
minutes.
● To establish a connection using the PIN code, use a
computer that is connected to the router (access point).
● The following item is necessary to set up a Wireless
(Wi-Fi) connection.
● Router (access point)
1.
Check that the router (access point) is working correctly.
2.
Open the PIN code configuration window (web page) for the
router (access point) on your computer.
3.
Make sure the wireless LAN option is attached to the
machine.
For details, see page 6 "Attaching the wireless LAN option".
4.
Press the [User Tools/Counter] key.
5.
Press the [ ] or [ ] key to select [Network Settings], and
then press the [OK] key.
2/3
Print List/Report
Network Settings
Copier Features
6.
If you are requested to enter a password, enter the
password using the number keys, and then press the [OK]
key.
Network Set. are Locked
Enter Password
A password for accessing the [Network Settings] menu can be
specified in [Admin. Tools Lock] under [Admin. Tools] menu.
7.
Press the [ ] or [ ] key to select [WiFi], and then press the
[OK] key.
Network Settings
1/2
Ethernet
WiFi
IPv4 Configuration
10
DZV451
DZV150
DZV151
DZV152
8.
Check [WiFi Enable] is selected, and then press the [OK]
key.
WiFi
WiFi Enable
9.
Press the [ ] or [ ] key to select [Enable], and then press
the [OK] key.
WiFi Enable
Disable
Enable
10. Turn off the machine and then turn on.
11. Repeat Steps 4 to 6.
12. Press the [ ] or [ ] key to select [Connect Method], and
then press the [OK] key.
Network Settings
2/2
IPv6 Configuration
Connect Method
13. Press the [ ] or [ ] key to select [WiFi], and then press the
[OK] key.
Connect Method
Ethernet
WiFi
14. Press the [ ] or [ ] key to select [WiFi], and then press the
[OK] key.
Network Settings
1/2
Ethernet
WiFi
IPv4 Configuration
15. Press the [ ] or [ ] key to select [WPS], and then press the
[OK] key.
WiFi
2/2
Current Connection
Input SSID
WPS
16. Press the [ ] or [ ] key to select [PIN], and then press the
[OK] key.
WPS Type
PBC
PIN
17. Check the PIN code.
PIN
PIN Code:
XXXXXXXX
Connect
Abort
Write down the PIN code in case you might forget it.
DZV153
DZV154
DZV155
DZV156
DZV152
DZV160
DZV162
DSG098

Advertisement

Table of Contents
loading

This manual is also suitable for:

M 2701

Table of Contents