Ricoh M 2700 Setup Manual page 11

11. Press the [ ] or [ ] key to select [Connect Method], and
then press the [OK] key.
Network Settings
2/2
IPv6 Configuration
Connect Method
12. Press the [ ] or [ ] key to select [WiFi], and then press the
[OK] key.
Connect Method
Ethernet
WiFi
13. Press the [ ] or [ ] key to select [WiFi], and then press the
[OK] key.
Network Settings
1/2
Ethernet
WiFi
IPv4 Configuration
14. Press the [ ] or [ ] key to select [WPS], and then press the
[OK] key.
2/2
WiFi
Current Connection
Input SSID
WPS
15. Press the [ ] or [ ] key to select [PBC], and then press the
[OK] key.
WPS Type
PBC
PIN
16. Press the selection key under [Yes].
PBC
WPS PBC Connect ?
Yes No
"Please push the [AP] within 2 minutes" appears, and the
machine starts to connect in PBC method.
17. Press the WPS button on the router (access point) within
two minutes.
WPS
• For details about how to use the WPS button, refer to the manuals for
the router (access point).
18. Check the result.
Connection has succeeded:
PBC
Connection to AP
has Succeeded
• Press the selection key under [EXIT] to return to the screen
displayed in Step 15, and then press the [User Tools/Counter]
key to return to the initial screen.
DZV155
DZV156
DZV152
DZV160
DZV161
DSG093
CHV607
EXIT
DSG094
Connection has failed:
PBC
Connection to AP
has Failed
• Press the selection key under [EXIT] to return to the screen
displayed in Step 15. Check the configuration for the router
(access point), then try the connection again.
Configuring the Wireless (Wi-Fi) settings is complete.
To use the printer driver, install the printer driver according
to the procedure on page 11 "Easy Setup Using the
CD-ROM" and select "Automatically configure the printer
network" on Step 6.
EXIT
DSG095
9