Table of Contents
Advertisement
9.3 Setup
Configuring the triggers
To reset the effects to factory settings:
1.
Press [Kit Edit] to call up the menu for editing the drum kits. The display shows
'INST' .
2.
Press [+] or [–] repeatedly until the display shows 'RSET' and confirm with
[Enter].
3.
Press [+] or [–] repeatedly until the display shows 'EFCT' .
4.
Press again [Enter].
ð The display shows 'END' . The drum kit's effects are reset to factory settings.
The trigger function lets you set how the e-drum set responds to your playing style.
You can set the parameters for sensitivity, threshold, velocity curve, and crosstalk.
1.
Press [Setup] to call up the menu for editing the settings. The display shows
'TRIG' .
2.
Confirm the selection with [Enter].
3.
Press [+] or [–] repeatedly until the display shows the desired instrument.
4.
Press [Enter] and press [+] or [–] repeatedly until the display shows the desired
parameter you want to change. The following parameters are available:
Display
Function
'RE-C'
Sets the sensitivity of the selected instrument (display shows
'001' ... '008' ).
'THRS'
Sets the threshold that must be exceeded for a pad to
respond. This is to prevent a pad from responding to the
vibrations of other pads (display shows '000' ... '050' .
'CURV'
Sets the velocity values for the selected instrument to define
the type of response. There are four velocity curves to
choose from.
'EASY'
'NORL'
'DYN'
'FID'
'XTLK'
Sets the crosstalk value to avoid overlays caused by uninten‐
tionally addressed pads. If a pad unintentionally responds to
the hit on another pad, this can be prevented by raising the
crosstalk value for the respective pad (display shows
'000' ... '080' ).
'COPY'
Copies the settings of an instrument and transfers them to
another instrument.
HD-17 Mako
Operating
Easily play the maximum MIDI Velocity
127
Even transitions with velocity changes
High adaptability to loud or quiet play
MIDI Velocity 100, regardless of the
strength of the hit
23
Advertisement
Table of Contents
