Setup - thomann Hitman HD-7 Sonic User Manual

Operating

9.3 Setup

Configuring the triggers
Selecting Midi channels
24
The trigger function lets you set how the e-drum set responds to your playing style.
You can set the parameters for sensitivity, threshold, velocity curve, and crosstalk.
1. Press [Setup] to call up the menu for editing the settings. The display shows
'TRIG' .
2. Confirm the selection with [Enter].
3. Press [ +] or [–] repeatedly until the display shows the desired instrument.
4. Press [Enter] and press [ +] or [–] repeatedly until the display shows the desired
parameter you want to change. The following parameters are available:
Display Function
'SENS' Sets the sensitivity of the selected instrument (display shows
'001' ... '005' ).
'THRS' Sets the threshold that must be exceeded for a pad to
respond. This is to prevent a pad from responding to the
vibrations of other pads (display shows '000' ... '050' .
'CURV' Sets the velocity values for the selected instrument to define
the type of response. There are four velocity curves to
choose from.
'EASY'
'NORL'
'DYN'
'FID'
'XTLK' Sets the crosstalk value to avoid overlays caused by uninten‐
tionally addressed pads. If a pad unintentionally responds to
the hit on another pad, this can be prevented by raising the
crosstalk value for the respective pad (display shows
'000' ... '080' ).
'COPY' Copies the settings of an instrument and transfers them to
another instrument.
5. Press [Enter] and press [ +] or [–] repeatedly until the display shows the desired
new value.
6.
Press again [Enter] to save the selection. With [Back] to return to the previous
menu level without saving the settings.
1. Press [Setup] to call up the menu for editing the settings. The display shows
'TRIG' .
2. Press again [Setup], [ +] or [–] repeatedly until the display shows 'CHAN' .
e-drum set
Easily play the maximum MIDI Velocity
127
Even transitions with velocity changes
High adaptability to loud or quiet play
MIDI Velocity 100, regardless of the
strength of the hit