Advertisement
Quick Links
Advertisement
Related Manuals for thomann Millenium SeriesMPS-750 Mesh set
Summary of Contents for thomann Millenium SeriesMPS-750 Mesh set
- Page 1 MPS-750 Mesh Set e-drum set assembly instructions...
- Page 2 Musikhaus Thomann Thomann GmbH Hans-Thomann-Strasse 1 96138 Burgebrach Germany Telephone: +49 (0) 9546 9223-0 E-mail: info@thomann.de Internet: www.thomann.de 04.04.2017, ID: 372716 (V2)
- Page 3 Table of contents Table of contents Safety instructions.......................................... 4 Scope of delivery..........................................5 Assembly.............................................. 6 Protecting the environment....................................12 MPS-750 Mesh Set...
-
Page 4: Safety Instructions
Safety instructions Safety instructions DANGER! Danger for children Ensure that plastic bags, packaging, etc. are disposed of properly and are not within reach of babies and young children. Choking hazard! Ensure that children do not detach any small parts (e.g. knobs or the like) from the unit. They could swallow the pieces and choke! Never let children unattended use electrical devices. -
Page 5: Scope Of Delivery
Scope of delivery Scope of delivery Before you assemble your drum set, make sure the contents of package is complete according to the following list. Millenium MPS-750 Mesh Set e-drum module Millenium MPS-750 1 × mesh snare pad, 10", dual zone 3 ×... -
Page 6: Assembly
Assembly Assembly Overview Loosen the screws of the clamps before sticking the tubes together. Mount the various elements in the specified sequence. The positions of the pads, cymbals, etc. are shown in the illustration below. e-drum set... - Page 7 Assembly Assembling the rack CAUTION! Danger of cuts on hands and fingers When connecting the parts, take care for sharp edges on the metal tubes, screws etc. Align the upper and lower bracket for the connecting tubes (1, 2) of the two feet (3) of the rack in height and according to the desired playing position.
- Page 8 Assembly Insert the three short brackets (9) and the long bracket (8) for the cymbals as shown into the designated mounting clamps on the rack. Secure the supports at the desired vertical position using the retaining screws. Loosen the retaining screws on the bracket joints and turn the brackets (8, 9) into the desired playing positions. Then re-tighten the retaining screws.
- Page 9 Assembly Mounting cymbals on the rack Insert the three cymbal holders (3 × long, 1 × short) as shown into the clamps provided on the rack. Tighten the bolts on the clamps firmly and evenly. Unscrew the wing nuts from the cymbal holders and take the flat and felt washers off the holders. Place the cymbals on their supports as illustrated.
- Page 10 Assembly Bass drum pedal, hi-hat Screw the pedal and the pad as shown using the supplied screws. Place the beater into the hole provided on the rotary head of the kick drum pedal and tighten the clamp with the drum key firmly. Position the unit in a comfortable playing position in front of the rack.
- Page 11 Assembly Mounting the drum module on the rack Put the drum module up to the stop into the empty terminal of the left side arm. Align the module and tighten the wing nut of the clamp. Set-up and cabling Set up the rack, the pads and the cymbals according to your needs. As a final step, all triggers need to be wired to the drum module.
-
Page 12: Protecting The Environment
Protecting the environment Protecting the environment Disposal of the packaging material For the transport and protective packaging, environmentally friendly materials have been chosen that can be supplied to normal recycling. Ensure that plastic bags, packaging, etc. are properly disposed of. Do not just dispose of these materials with your normal household waste, but make sure that they are collected for recycling. - Page 13 Notes MPS-750 Mesh Set...
- Page 14 Notes e-drum set...
- Page 16 Musikhaus Thomann · Hans-Thomann-Straße 1 · 96138 Burgebrach · Germany · www.thomann.de...