Table of Contents
Advertisement
Operating
9
Operating
9.1 Functions
Switching on
Adjusting the volume
Resetting the drum module to factory
defaults
9.2 Drum kits
Selecting a drum kit
20
Check all cable connections for correct fit before turning on
Before switching on, turn the volume control [MASTER VOLUME] on the
drum module to minimum.
Turn the drum module on using the main switch [POWER ON/OFF] on the rear
panel.
ð The display shows 'K001' . You can now select a drum kit.
1.
Turn the [MASTER VOLUME] control to [MIN].
2.
Press [Start / Stop].
3.
Turn the [MASTER VOLUME] control clockwise until you hear the playing song
at a comfortable volume.
ð The drum module volume is set.
4.
Press [Start / Stop] to stop song playback.
1.
Turn the device on using the main switch [POWER ON/OFF].
2.
Simultaneously press [+] and [–].
3.
Turn the device back on using the main switch [POWER ON/OFF].
ð The display shows 'RSET' . All parameters of the drum module are reset to
factory settings.
A drum kit is a compilation in which a certain sound and several sound parameters
are assigned to each trigger. Selecting different drum kits lets you customise the
sound of your e-drum sets in seconds to the desired music genre.
1.
Simultaneously press [Back] and [Enter] to call up the menu item 'Kit Select' .
The display shows the number of the first preset drum kit.
2.
Use [ +] or [–] to select the desired kit.
e-drum set
Advertisement
Table of Contents
