Operating; Functions; Selecting And Adjusting Drum Kits - thomann Millenium MPS-450 User Manual

Operating

6 Operating

6.1 Functions

Turning on / off
Adjusting the volume
Reset to factory defaults
Automatic shutoff

6.2 Selecting and adjusting drum kits

Selecting a drum kit
14
Check all cable connections for correct fit before turning on
Before switching on, turn the [VOLUME] control to minimum.
Switch the drum module on or off with the main switch [POWER]. The current device
settings are retained when switching off.
To set the volume, hit a pad while slowly turning the [VOLUME] control clockwise.
To reset the entire drum module to factory settings, turn it off first. Then hold down
[<] and [>] simultaneously and additionally press [POWER] until the display shows
'FAC SET...' .
When the device is not used it automatically shuts off after 30 minutes.
To disable the automatic shutdown, use the Utility menu (
menu' on page 26).
A drum kit is a compilation in which a certain sound (Voice) and several sound
parameters are assigned to each pad. Selecting different drum kits lets you customise
the sound of your drum kit in seconds to the desired music genre. Besides the 30 pre‐
programmed drum kits you can also create, customise and save 10 user drum kits.
To select a certain drum kit, proceed as follows:
1. Press [KIT/VOICE].
ð The current kit name and kit number are displayed.
2.
Use the arrow buttons ([<] / [>]) or the jog wheel to select the desired kit.
The setting is automatically stored.
e-drum module
Ä Chapter 6.12 'Utility