Advertisement
OPERATING SPECIFICATIONS
Temperature Limits: 35-100°F (2-38°C)
Pressure Limits: 10-100 psi (0.689-6.9 bar)
For cold water use only.
Rated Service Flow:
Endurance High Flow Twin System - 7.5 gpm (28.4 lpm)
Endurance High Flow Triple System - 11.25 gpm (42.6 lpm)
Endurance High Flow Quad System - 15 gpm (56.8 lpm)
Service Life Between Cartridge Changes:
Endurance High Flow Twin System - 100,000 gal (378,541 liters) or 1 year
Endurance High Flow Triple System - 150,000 gal (567,812 liters) or 1 year
Endurance High Flow Quad System - 200,000 gal (757,082 liters) or 1 year
DIMENSIONS
21.7 (55.1)
Inch (cm)
INSTALLATION INSTRUCTIONS
1. The predrilled mounting holes in the bracket can be used
as a guide. The holes are on 16 inch centers. Mark and
insert anchors or screws in the wall.
NOTE: The large pretreatment cartridge can be removed
from the bracket and mounted seperately.
2. Follow steps 3-6 only if the pretreament cartridge
(Pleated Endurance HF) is going to be mounted seper-
ately. Otherwise proceed to Step 7.
3. Disconnect the hose between pretreatment head and the
manifold.
2
EVERPURE ENDURANCE INSTRUCTION AND OPERATION GUIDE
26 (66)
4. Unscrew the two screws that hold the pretreatment
bracket to the main bracket.
Remove Screws
33.2 (84.3)
18.7 (47.4)
Figure 1
Advertisement
