Table of Contents
Advertisement
The tBOX400-510-FL is designed for easy hardware configurations, such as the HDD (Hard
Disk Drive), DRAM and mini PCIe card. Chapter 2 will show you how to install the hardware.
2.1
Installing the Swappable HDD/SSD
Step 1
Attach a piece of Mylar on the back of an HDD/SSD as shown.
Step 2
As shown in the picture, slide the HDD/SSD into the SATA tray. Insert
screws into each side of the SATA drive through the corresponding holes .
Step 3
Install the SATA drive into the slot and fasten the screw to lock the SATA
drive to complete the installation.
Hardware Installation
tBOX400-510-FL Series User's Manual
HARDWARE INSTALLATION
CHAPTER 2
11
Advertisement
Table of Contents
Need help?
Do you have a question about the tBOX400-510-FL Series and is the answer not in the manual?