Record Query - ZKTeco K Series User Manual

9 Record Query

9 Record Query
Employees can view their saved attendance records by entering any query conditions. According to the entered query
conditions, records that meet the specified query conditions will be displayed on the screen.
On the initial interface, press and hold [M/OK] key to enter the Main Menu interface, then press ◄/► key to select
Record menu and press [M/OK] to enter the Record interface, shown as following figure 1:
Press finger/input ID/Punch Card,
enter the Start and End time, and
then press [M/OK] to view records.
Notes displayed at the bottom of the screen explain all letter meanings.
Verify: Validation Status.
F: Fingerprint Verification.
State: Attendance Status.
0: Check-in 1: Check-out

Note: For the other two record query modes, see
38
Records show as figure 2.
P: Password Verification I: Card Verification
4: Overtime Check-in
Appendix 3 K Series Economic Models
Press [M/OK] to view the details of
the attendance records. The
attendance details of the employee
with user ID of 1 on May 7 are as
figure 3:
5: Overtime Check-out
FAQs.