Schedule; Department-Based Scheduling - ZKTeco K Series User Manual

5 Shift Set
Press ▼ to select Shift setting,
Press [M/OK] key to enter Shift
setting interface.

Shift setting
The device supports a maximum of 24 shifts including two default shifts (shift 1 and shift 2). All shifts can be edited and a
single shift includes three time ranges at most.

5.3 Schedule

As the basis of attendance calculation, shifts should be set based on the actual condition of a company. If no
shift is set, the system makes attendance calculations based on default shifts set in attendance rules.
Press and hold [M/OK] key on
the initial interface to enter the
Main Menu interface.

5.3.1 Department-based Scheduling

The Schedule Type in Attendance Rule is Dept. Shifting.
1.Scheduling Records Query
Press numeric key '1' to enter
the Scheduling records Query
interface.
2.Edit Schedule
16
Press ▲/▼ to select a shift from the
list, and press  to enter the Edit
shift interface.
Press ◄/► key to select Shift set
menu and press [M/OK] to enter the
Shift set interface.
Enter the Dept. No, and press
[M/OK] to view result.
Press ▲/▼ to choose corresponding shift
attributes. Enter the time by using the
numeric keypad. Press [M/OK] to save.
Press ▼ key to select Schedule
and press [M/OK] key to enter the
Schedule interface.
The department's scheduling
records as shown as figure 3.