Daylight Saving Time (Dst) Setting - ZKTeco K Series User Manual

When is shown on the initial
interface, press [M/OK] to view
SMS message.

View personal SMS messages
After a user is successfully verified (multiple verification modes can be used and the following uses fingerprint verification
as an example), the user's personal messages will show up on the screen, as shown in the following figure.
Successfully verified!

Note: SMS messages only show up for 30 seconds, during which you can close current display interface by pressing
[M/OK] or [ESC] key so as to enter the Verification interface.

7.6 Daylight Saving Time (DST) Setting

The Daylight Saving Time is a widely used system of adjusting the official local time forward to save energy. The uniform
time adopted during the implementation of this system is known as the DST. Typically clocks are adjusted forward one
hour in the summer to make people early to bed and early to rise so as to make full use of illumination resources and save
electricity. Clocks are adjusted backward in autumn. The specific DST regulations vary with countries.
To meet the DST requirement, the K Series device supports the DST function to adjust forward one hour at ×× (Hour): ××
(Minute) ×× (Day) ×× (Month) and backward one hour at ×× (Hour): ×× (Minute) ×× (Day) ×× (Month).For example, adjust
the clock forward one hour at 08: 00 on April 1, and backward one hour at 08: 00 on October 1. (As shown in the following
figure 3)
On the initial interface, press and hold [M/OK] key to enter the Main Menu interface, then press ◄/► key to select
System menu and press [M/OK] to enter the System interface, shown as following figure 1:
K Series Economic Models User Manual
View the currently-valid Public
messages, as shown as figure 2.
Show user's personal messages
29