Sms Setting; Add An Sms Message - ZKTeco K Series User Manual

Press ▲/▼ to select the item
and press [M/OK] key to enter
the edit interface.
Press ▲/▼ to switch among the entry boxes. Enter the switch time using the numeric keypad and the switch
name using the T9 input method. Press ◄/►to select a state. After completed, press [M/OK] to save or press
[ESC] to cancel the setting and return to the previous interface.

7.5 SMS Setting

The menu item allows you to add, edit, view, and delete SMS messages. On the initial interface, press and hold [M/OK]
key to enter the Main Menu interface, then press ◄/► key to select System menu and press [M/OK] to enter the System
interface, shown as following figure:
SSR Type
On the System interface, press ▼ key to select SMS and press [M/OK]
key to enter the SMS interface.

7.5.1 Add an SMS Message

Press numeric key '3' to enter
Add a SMS interface.
K Series Economic Models User Manual
Set parameters by referring to the
instructions in the following text box
and press [M/OK] key to save.
No-SSR Type
Press [M/OK] key to open T9 input
method and enter the SMS content.
Then enter the Start, Valid time and
choose Type. Press [M/OK] to save.
As shown in the preceding figure 4,
when the time reaches 07:00, the
attendance status switches to
Check-In.
When adding successful, the
interface shows as above.
27