Customising Report Window Tabs; Creating Custom Reports - Elcometer 2300 Series Operating Instructions Manual

20.2 Customising report window tabs

The Header, Measurements and My Reports tabs are always visible in the Report Window. All other
tabs (and user defined tabs) can be added or deleted:
1. In the Explorer Window, click on Reports.
2. In the List Window, all reports in the 'Tab Reports' column will appear as tabs in the Report
Window. Use the arrows between the two columns to add or remove reports from this column.
• All reports with a blue icon
• All reports with a brown icon

20.3 Creating Custom Reports

ViscosityMaster software includes a built-in report designer which can be used to create reports
customised to your requirements.
To create a custom report:
1. In the Explorer Window, click on 'Reports'.
2. In the Toolbar, click 'New Report'.
3. Choose a name for your report and press 'Return'.
are standard reports which cannot be deleted.
are user defined reports which may be deleted if needed.
W V
ORKING WITH ISCOMETER DATA
R
43