Abbreviations Legend - Smeg WD3060 User Manual

11 ABBREVIATIONS LEGEND

Abbreviations used to identify the components
BPE: Door-lock system
EVCC: steam condenser inlet valve
EVD: Demineralized water inlet valve.
EVF: Cold water inlet valve.
EVR: Water softener regeneration valve.
FM1, FM2... , FM5: peristaltic pumps P1, P2... P5 flowmeters
FMC: warm water flowmeter
FMD: demineralized water flowmeter
FMF: Cold water flowmeter
K: heating elements relay
MA: drying system motor.
MCM: Door position (signal switch)
MCP: Door position (signal switch)
ML: washing pump
MS: draining pump
P1, P2, ..., P5: detergents peristaltic pumps
PAP: high pressure switch (washing pump ML monitoring)
PL1: working level pressure switch
PS: safety level pressure switch.
PSC: steam condenser draining pump.
R1, R2, R3: chamber heating elements.
RA: Resistenza asciugatore Drying System
EMF (SF): Mains EMI filter (electrical).
SP1, SP2, ... , SP5 (also SL1, SL2,... SL5): Detergent tanks level sensors.
SLC: Steam condenser level sensor.
SS: Salt sensor (for the salt presence in the softener reservoir)
TA1: PT1000 probe, Drying temperature sensor
TCL: PT1000 probe, washing chamber temperature control sensor
TL1: PT1000 probe, washing chamber temperature working sensor
THS1: Drying system elements safety thermostat.
THS: Chamber heating elements safety thermostat.
WD3060 - WD5090 USER MANUAL 24