Smeg WD3060 User Manual page 31

fig. 18 – Appliance bottom spray arm: remove and clean regularly to maintain optimal washing results.
Cleaning the filter unit
The filter unit consists of a coarse filter, a conical fine filter, and a larger external filter. To ensure that the appliance
operates effectively, it is extremely important to keep the filters clean. They should therefore be inspected frequently
(e.g. if glassware with paper labels is washed, inspect after each cycle - in normal conditions the filters should be
cleaned once a week) to remove deposits which may adversely affect operation.
WARNING
Filters and spray arms may contain biologically contaminated material and must be handled with due care,
using protective equipment (e.g. gloves, protective glasses, lab coat).
The potentially contaminated material in the filters and any other components of the device must be
handled and disposed of appropriately.
fig. 19 – Draining filters in the chamber; dismantling procedure and detailed view.
Coarse conical filter
To remove the coarse filter, press the "tabs" of the filter and pull upwards (panel "A"). Clean the filter and replace it.
Conical fine filter
This is located underneath the conical coarse filter (B) and should be checked and cleaned whenever the coarse filter
is inspected. Clean with a brush and hot water for effective removal of deposits.
External circular filter
To remove this filter:
 Hold of the "tabs" of the coarse conical filter and turn it anticlockwise (C).
WD3060 - WD5090 USER MANUAL 31