Functioning; How To Open The Washing Chamber Door - Smeg WD3060 User Manual

KEY
1 - START, starts the selected program
2 - RESET, forces the machine to run through a
reset procedure (both in the case of a deadlock
and in other situations, such as those after an
alarm has occurred)
3 - STOP, stops the current program (also for
the printing of the last cycle).
4 - UP, selection key (scroll up).
5 - DOWN, selection key (scroll down),
(also for the printing of the machine
parameters).
Symbols similar to the keys appear on the bottom line of the display as their functions are activated.
Some keys have special functions depending on the active screen, such as the "STOP" key: if used when the machine is
stopped, has the function to "send to the printer" the last cycle performed.
In case of "no energy supply": the door is locked.
Do not try to force the opening, in order to avoid damages to the security lock.

7 FUNCTIONING

Basic steps for using the device, once installed, are:
1. Correct positioning of the load to be processed within the washing trolleys in the chamber.
2. Installation and connection of detergents tanks in the cabinet side.
In the following, the instructions to access the washing chamber of the device and for the opening of the cabinet side.

7.1 HOW TO OPEN THE WASHING CHAMBER DOOR

The device is provided with an automatic locking system.
Do not force the opening of the door, proceed as described:

Connect the machine to the electricity supply.

Open the hatch of the side cabinet and power on the machine turning the main switch on.

Wait for the device initialization, then press the "ENTER" key for the opening of the door.
WD3060 - WD5090
FUNCTION
USER MANUAL
KEY
6 - LEFT – DRYER ON, key used to select the
separate drying cycle (if available); it is also
used for moving to the left in each menu.
7 - RIGHT – DRYER OFF, selection key for
deactivating the drying cycle (if available); it is
also used for moving to the right in each menu.
8 - ENTER, confirms the selection made /
program selection / door opening.
9 - INC, increases the value / selects "yes"/
setting of the delayed start (max 24h)
10 - ESC, quits the current mask and goes back
to the previous step.
11 - DEC, decreases the value in question /
selects "no"
FUNCTION
12