Cable Lengths; Cable Specifications - Danfoss VLT 5000 Operating Instructions Manual

Cable Lengths

Baud Rate
125k baud
250k baud
500k baud

Cable Specifications

Physical Characteristics
Two shielded pairs
Overall braid shield
Drain wire
Outside diameter
Jacket insulation *
Jacket marking *
Electrical Characteristics
DRC (braid + tape + drain)
Applicable Environmental Characteristics
Agency Certifications (U.S. and Canada)
Bend radius - installation / fixed
Operating ambient temperature
Storage temperature
Pull tension
* Other types of jacket insulation are allowable
provided that internal construction and electrical
charactersitics adhere to this specification.
6
Max. total cable length [m]
500 meters (1640 ft.)
250 meters (820 ft.)
100 meters (328 ft.)
®
VLT 5000/ 5000 FLUX/ 6000 HVAC/
8000 AQUA DeviceNet
Drop Length
Maximum
6 meters (20 ft.)
for one drop
Specification
Common axis with drain wire in center
65% coverage 36 AWG Cu braid. (individually tinned)
# 18 (19 x 30 AWG) Copper (individually tinned)
0.475 ± 0.015 inches (round),
roundness - radius delta to be within 15% of 0.5 O.D.*
0.040 inches minimum
Vendor Name & Part # 1 Pr 18 and 1 Pr 15 AWG
shielded, additional markings are acceptable
Specification
1.75 Ohms/1000 ft. (nom. @ 20°C)
Specification
NEC (UL) type, CL2/CL3 (min.)
20 x diameter / 7 x diameter
-20° to + 60°C @ 8 amps; de-rate current linearly to
zero @ 80°C
-40° to + 85°C
190 Ibs max
MG.50.H4.02 - VLT is a registered Danfoss trademark
Cumulative
156 meters (512 ft.)
78 meters (256 ft.)
39 meters (128 ft.)