Danfoss VLT 5000 Operating Instructions Manual page 24

904 PPO selection
(PPO TYPE SELECT)
Value:
PPO type 1 (PPO TYPE 1)
PPO type 2 (PPO TYPE 2)
PPO type 3 (PPO TYPE 3)
PPO type 4 (PPO TYPE 4)
Function:
The choice of PPO type has to match the input
and output data of the master.
Description of choice:
900 = PPO type 1 (100/150):
This PPO type has a 16 bit control word and a 16
bit reference to controlling the VLT. The status word
and the actual speed value will also be returned
as 16 bit value. See Fieldbus profile.
901 = PPO type 2 (101/151):
The same structure as in PPO type 1, but with 2
additional free selectable process data.
902 = PPO type 3 (20/70):
This profile fulfill the Instance 20/70 profile. See
Control word under Instance 20/70.
903 = PPO type 4 (102/152):
4 free selectable process data that can be chosen
in parameter 915/916 PCD configuration.
915 PCD write configuration
(PCD CONFIG WRITE)
Value:
Sub index 1 (PCD 1)
Sub index 2 (PCD 2)
Function:
Different parameters can be assigned to PCD 1-2 if
instance 101/151 is selected in parameter 904 PPO
Selection. The values in PCD 1-2 will be written to the
selected parameters in the form of data values.
Description of choice:
The sequence of the subindixes corresponds to the
sequence of the PCD in the PPO, i.e. subindex 1 =
PCD 1, subindex 2 = PCD 2 etc. Each subindex may
contain the number of any VLT parameter.
Note that subindex 3 - 8 are having no function.
= factory setting. () = display text [] = value for use in communication via serial communication port
MG.50.H4.02 - VLT is a registered Danfoss trademark
[900 ]
[901 ]
[902 ]
[903 ]
Different parameters can be assigned to PCD 1-2 if
instance 101/151 is selected in parameter 904 PPO
Selection. The values in PCD 1-2 will be read from the
selected parameters in the form of data values.
The sequence of subindices corresponds to the
sequence of the PCD in the PPO, i.e.subindex 1 =
PCD 1, subindex 2 = PCD 2 etc. Each subindex may
contain the number of any VLT parameter.
Note that subindex 3 - 8 are having no function.
Readout of actual address of the devicenet option.
[Parameter number]
[Parameter number]
The parameter channel PCV may be blocked so
that the modification of parameters through this
channel is not possible. Access through the standard
RS 485 interface is still possible.
- Without DeviceNet: Parameter processing
- With DeviceNet: Parameter processing through
®
VLT 5000/ 5000 FLUX/ 6000 HVAC/
8000 AQUA DeviceNet
916 PCD read configuration
(PCD CONFIG READ)
Value:
Sub index 1 (PCD 1)
Sub index 2 (PCD 2)
Function:
Description of choice:
918 User address
(STATION ADDRESS)
Value:
0 - 63
Function:
927 PCV operating authority
(PARAMETER EDIT)
Value:
Without DeviceNet (DISABLE)
With DeviceNet (ENABLE)
Function:
NB!:
When parameters 927 and 928 are deactivated,
the "Warning 34" in the display of the VLT
will also be suppressed.
Description of choice:
through the DeviceNet is not active.
the DeviceNet is active
[Parameter number]
[Parameter number]
63
[ 0]
[1 ]
23